Single-Phase Inverter System

Single-Phase Inverter System

The EK DAS 200-7.0-BNSP Single-Phase Inverter System is designed to convert DC voltage to an alternating 230V and 50 Hz frequency sinusoidal voltage. The EK DAS 200-7.0-BNSP Single-Phase Inverter...
Find out more
 

3h Bus Contactor Shutdown Module

3h Bus Contactor Shutdown Module

3h Bus Contactor Shutdown Module - EK 3H-OFF BNSP is designed to disconnect the 3h Bus in the EK BNSP 20000. The EK 3H-OFF BNSP is controlled by an external potential-free contact of the EK CPU BNSP-1...
Find out more
 

Soft Start Module

Soft Start Module

The Soft Start Module, type EK APUK-25, prevents a sudden increase in current when switching on the device with inductive characteristics that can cause disturbance or malfunctions of the devices.
Find out more
 

Resistance Module

Resistance Module

Resistance module, EK BRM-BNSP provides high state of impedance to EK BNSP 20000 grounding system. The EK BRM-BNSP also contains test inputs, which can be tested by short-circuiting to determine the...
Find out more
 

Minimum Load Module

Minimum Load Module

The EK MNT BNSP-20000 Minimum Load Module is designed to ensure minimum system power while the system is unloaded. Also, the EK MNT BNSP-20000 is used to dissipate overvoltage which is generated...
Find out more
 

Automatic Bypass

Automatic Bypass

The purpose of the Electronic Bypass EK ABP 25/3 V is to measure and transmit to the output terminals of the correct three-phase sinusoidal voltage (3x230 / 400V, N, PE) which is coming from the...
Find out more
 

Accu Battery Control Module

Accu Battery Control Module

Accu Battery Control Module EK MKB-BNSP is intended for controlling the battery life of the uninterruptible Power Supply System and communicating with the EK CPU BNSP-1 module, which sends the...
Find out more
 

Rectifier-Charger FDPAB 48-30A

Rectifier-Charger FDPAB 48-30A

Rectifier-Charger, type: FD PAB 48-30A is designed for charging lead-acid batteries with rated voltage of 48 V. The charger is also used for powering the consumer on an equal 48 V voltage, with a...
Find out more
 

Rectifier - Charger EK PAB 60−20/3U

Rectifier - Charger EK PAB 60−20/3U

Rectifier - Charger, type: EK PAB 60−20/3U is designed for charging lead-acid batteries with rated voltage of 60 V. The charger is also used for powering the consumer on an equal 60 V voltage, with...
Find out more
 

Electro-energy rectifier-charger module

Electro-energy rectifier-charger module

Electro-energy rectifier-charger module, type: EK PAB 200-130A / 3U, with Its input / output components are located inside the Cabinet 1 of Power supply system of the railway station, type: EK BNSP...
Find out more